Quick answer
- A clopening is a closing shift followed by an opening shift for the same person, with too little rest between them.
- Federal law (FLSA) sets no minimum rest between shifts for adults. Texas and most states add nothing either.
- Oregon requires 10 hours of rest, and New York City fast food and Evanston require 11. Employee consent is needed, and extra pay may be owed.
A clopening is a schedule in which the same employee works a closing shift and then an opening shift the next morning, with only a short rest between them. A worker who closes the cafe at 9 p.m. and opens it at 5:30 a.m. has a clopening. Some cities require consent or extra pay for it.
How a clopening works
The name is a blend of "closing" and "opening". It happens wherever a business closes late and opens early: restaurants, coffee shops, retail stores, bars, gyms and hotels. The same few reliable people get scheduled for both ends of the day, because they know how to close the register and how to open the store.
What counts is the gap between the end of one shift and the start of the next, not the clock times themselves. Where a law defines a clopening, it sets a number of rest hours, usually 10 or 11, and any next shift starting inside that window qualifies. A shift that runs past midnight can still count as the first half.
Employers use them because they are convenient. A manager can fill an early shift without calling anyone new, and a closer who lives nearby can cover. Employees pay for that convenience with sleep and commute time, and it is one of the most common complaints in hourly scheduling.
At a glance
| Question | Answer |
|---|---|
| Who it applies to | Any hourly or shift employee scheduled to close and then open. Common in food service, retail, hospitality and fitness. |
| Federal requirement | None. The FLSA does not require rest between shifts for adults. Overtime still runs on the workweek. |
| Places with rules | Oregon (statewide), New York City fast food, Evanston, Illinois, and other fair workweek cities. Check your city. |
| Typical numbers | 10 hours of rest in Oregon; 11 hours in New York City fast food and Evanston; $100 premium in New York City fast food; time and a half in Oregon. |
| Related terms | Predictive scheduling, split shift, double shift, on-call pay |
Worked example at Northfield Coffee
Northfield Coffee in Austin closes at 9 p.m. Sam Rivera, who works the kitchen at $18.00 an hour, closes on Monday and is scheduled to open at 5:30 a.m. on Tuesday. The rest between shifts is:
- 9 p.m. to midnight: 3 hours
- Midnight to 5:30 a.m.: 5.5 hours
- Total rest: 3 + 5.5 = 8.5 hours
That is short under every rule below, and the 8.5 hours also has to cover the commute, dinner and sleep. Because Northfield is in Texas, no city rule applies and nothing extra is owed. The next table shows what the same schedule would cost if the cafe were somewhere that has a rule (illustrative only).
| Rule | Rest required | Does 8.5 hours qualify? | Cost for this clopening |
|---|---|---|---|
| Texas, no local rule | None | Not regulated | $0 extra |
| Oregon | 10 hours | Yes, 1.5 hours short | Time and a half for hours in the window: 1.5 hours × $18.00 × 1.5 = $40.50 instead of $27.00, so $13.50 extra |
| New York City fast food | 11 hours | Yes, 2.5 hours short | $100 premium, plus written consent |
| Evanston, Illinois | 11 hours | Yes, 2.5 hours short | Additional pay for agreeing employees; check the city for the amount |
The Oregon math works because the 10-hour window after a 9 p.m. close ends at 7 a.m. Sam's work from 5:30 to 7:00 a.m. is inside it, which is 1.5 hours. The rest of the opening shift is paid at the regular rate. If the opening shift runs 8 hours, the day's pay is 1.5 hours at $27.00 plus 6.5 hours at $18.00, which is $40.50 + $117.00 = $157.50.
This example is illustrative. Oregon's law covers only retail, hospitality and food services employers with 500 or more employees worldwide, and the New York City rule covers fast food chains, so a single cafe would generally not be covered.
Federal rules: no required rest between shifts
The Fair Labor Standards Act (FLSA) does not require rest between shifts. The U.S. Department of Labor's FLSA page says there is no limit on the number of hours employees 16 or older may work in a workweek. The Act covers minimum wage, overtime, recordkeeping and youth employment, and it does not address rest between shifts.
That makes a federal clopening a pay question, not a legal violation. Every hour from the close and the open goes on the same timesheet, and any week over 40 hours triggers overtime at one and one-half times the regular rate for non-exempt staff. Our guide on how to calculate overtime shows the arithmetic. For meal and rest breaks inside a shift, see lunch break laws by state.
Clopening laws by city and state
Rules on rest between shifts sit inside fair workweek laws. They are local, and most cover only large employers. Our guide to predictive scheduling laws has the full city table and notice periods, so this section covers only the rest rules.
| Place | Rest between shifts | Consent and pay | Covered employers (summary) |
|---|---|---|---|
| Oregon (statewide) | 10 hours after the end of the previous day's shift | Employee must request or agree. Hours worked inside the window are paid at time and a half. | Retail, hospitality and food services with 500+ employees worldwide |
| New York City (fast food) | 11 hours | Written consent and a $100 premium for each clopening worked | Fast food chains covered by the Fair Workweek Law |
| Evanston, Illinois | 11 hours | Employee must agree and receives additional pay; the city page does not list the amount | Hospitality, retail, warehouse services, manufacturing and building services with 100+ employees worldwide; restaurants need 30+ locations and 200+ employees |
Sources: Oregon Bureau of Labor and Industries, NYC Department of Consumer and Worker Protection and the City of Evanston. The Oregon page says an employer cannot schedule work in the first 10 hours after a previous day's shift unless the worker requests or agrees to it. The New York City announcement says fast food employers "cannot schedule a 'clopening' shift unless the worker consents in writing and receives a $100 premium."
Other fair workweek cities, including Seattle, Los Angeles and Philadelphia, have their own rest rules with different hours and pay. Some city sites block automated access, so we have not listed their numbers here. Check each city's labor standards office before you schedule. New York City's retail rules differ from its fast food rules, so a retailer should read the retail page separately.
If you are covered, three habits keep you safe. Ask before you schedule a short turnaround and keep the answer in writing. Pay any premium in the same pay run, since it is wages and belongs on the pay stub. And keep the schedule history, so you can show who asked for which change. Pay owed for other late changes is covered with reporting time pay and on-call pay.
Why short rest matters
Employers who are not covered by a law still have reasons to avoid it. A survey of 1,990 Norwegian nurses published in PubMed Central defined quick returns as rest of under 11 hours between shifts. Quick returns were associated with insomnia, excessive sleepiness, excessive fatigue and shift work disorder, and nurses with more than 30 quick returns in a year had about 2.9 times the adjusted odds of shift work disorder compared with those with none.
The study was cross-sectional, so it shows an association and cannot prove that short rest caused the problems. It looked at nurses in Norway, not US restaurant staff, so treat it as a warning and not a forecast. Our shift work statistics page covers more on fatigue and schedules.
How to schedule without clopenings
The fix is mostly a matter of how the schedule is built. These habits remove most short turnarounds:
- Check the gap, not the day. For each person, compare the end of the last shift to the start of the next. Set your own minimum, such as 11 hours, even where no law requires it.
- Build closing and opening teams. Follow a close with another evening shift, not a morning one, and let openers rotate to the early crew.
- Rotate fairly. If the same person always gets the short turnaround, people notice and leave.
- Publish early. A schedule posted two weeks ahead leaves time to fix a bad gap. Some cities require it.
- Let people swap, and record the request. A swap the employee asks for is generally treated differently, but keep the request in writing.
- Plan for late closes. A close that runs 45 minutes over can turn a legal gap into a short one. Look at the punch times and not just the schedule.
For a layout that shows each person's close and next open together, the shift schedule template is a free place to start, and the restaurant scheduling guide lists what to look for in a tool. For how shifts are named and timed, see first, second and third shift hours.
Clopening vs split shift vs double shift
These get mixed up because each makes a long day, but they are different.
| Term | What it means | Example |
|---|---|---|
| Clopening | A close and the next morning's open with short rest between | Close at 9 p.m., open at 5:30 a.m. |
| Split shift | Two work blocks in one day with an unpaid, employer-set gap | 6 a.m. to 10 a.m., then 3 p.m. to 7 p.m. |
| Double shift | Two full shifts back to back with no meaningful gap | 7 a.m. to 11 p.m. |
A clopening spans two calendar days, and the rest is what is short. A split shift sits inside one day, and the gap is unpaid. A double shift has no gap at all, and its hours count toward overtime.
Related terms
- Predictive scheduling: laws on schedule notice, changes and rest between shifts.
- Split shift: a workday broken by an unpaid gap the employer sets.
- Reporting time pay: pay owed when a worker shows up and is sent home early.
- On-call pay: when waiting for a call counts as paid time.
- First, second and third shift hours: how shifts are named and timed.
More HR glossary terms: Predictive scheduling · Split shift · On-call pay · Reporting time pay.
Frequently asked questions
What is a clopening shift?
A clopening shift is a closing shift followed by an opening shift for the same employee, with short rest in between. For example, someone who closes at 9 p.m. and opens at 5:30 a.m. gets 8.5 hours. No federal law bans it, but Oregon, New York City and Evanston restrict it.
Is a clopening illegal?
Not under federal law, and not in most states. The FLSA does not require rest between shifts for adults. In places with fair workweek laws, such as Oregon, New York City fast food and Evanston, an employer generally cannot schedule one unless the employee agrees, and extra pay may be owed.
How many hours between shifts is required?
Federal law sets none. Where a law applies, the window is 10 hours in Oregon and 11 hours in New York City fast food and Evanston. Shifts that start inside the window count as clopenings. Check the agency for your city, because exact rules differ.
Do employees get paid extra for a clopening?
Only where a law requires it. Oregon pays time and a half for hours worked inside the 10-hour window, and New York City fast food employers owe a $100 premium for each clopening worked. Evanston requires additional pay for employees who agree, and its city page does not list the amount.
Can an employee refuse a clopening?
Where the laws apply, yes. Oregon and Evanston allow a clopening only if the employee requests or agrees, and New York City fast food requires written consent. In a state with no such law, an employer can usually schedule one, but fatigue and turnover are good reasons to ask first.
How do you avoid clopening shifts when scheduling?
Check the gap between each person's last shift end and next shift start before you publish. Keep a closing crew separate from an opening crew, rotate who does each, and offer swaps. A schedule that shows both shifts on one row makes short turnarounds easy to spot.
Book a demo